WES-1000B Digital Display Universal Testing Machine

WES-1000B Digital Display Universal Testing Machine

Performance introduction:

It can process the test of tensile, compression, bending and cutting of all kinds of metal material as well as the test of compression test of plastics, cement and concrete and other nonmetal material. Adding simple accessories, it also can do a variety of performance tests of belts, chains, steel wires, welding electrodes, tiles and component parts. This machine adopts underlying cylinder, highness is low, and weight is light. it is especially applicable for engineering apartments.

Electronic dynamometry and LCD display test force-time curve, test force, peak value of test force, yield force of material owning obvious yield feature. you can see test data intuitively. You can input sample number, cross sectional area and test tensile strength, yield strength and other mechanical properties. Besides, you also can print test results.

Main technical parameters

Model WES—1000B

The Maximum test force (KN) 1000KN

Measurement range The whole does not divide classes , equivalent 3 steps

Test Force Resolution 0.1KN

Test force value relative error Better than the shown ±1%

Deformation precision ±0.5%FS

Max. Tensile space 700mm

Grip manner Manual or automatically grip

Grip diameter of round specimen Φ20-60mm

The thickness of flat specimen grip 0—40mm

Max. gripping width of flat specimen 80mm

Upper and lower platen size (mm) 204×204mm

Bending test pressed rolling distance 100~600mm

Piston stroke 200mm

Tensile and compression space between two columns 550mm

Electromotor power of oil pump 1.1KW

Move electromotor power of moving beam 0.75KW

Exterior size of host 890×660×2200

Noise ≤75dB

Weight 2600Kg

Applications:
It adopts hydraulic power pack to drive the piston in the oil cylinder to provide testing load. By using load cell and photoelectric encoder, the computer is timely showing the testing parameters like testing load, piston stroke, deformation of specimen and various kinds of testing curves etc.
This machine is servo control mode and the computer with strong function software does data processing and issues the test reports.
The software based on Windows system is able to make automatic calculating of test results, i.e. tensile strength; upper / lower yield strength, Non proportional stress point etc. Report creation function makes it is very simple to make testing report in needed format. It is necessary inspect device in the filed of steel and iron factory, the laboratories,machinery etc

Load frame
Rigid four-column & two -lead screw construction & compact design
Dual workspace design: Upper for tension, Lower for compression or bending tests
Movable lower crosshead providing exceptional ease of operation
Accurate force measurement through precision load cell
With open front hydraulic wedge grips for easy change of inserts and specimen loading
Integrated displacement photoelectric encoder
Cylinder mounted at the bottom of the machine
Overload protection: When the testing load is over 2%-5% of Max. Load, the system will unload.
Stroke protection: When the ram arrives at the upper limited position, the motor of oil pump will stop.

Control Unit:
1. Constant speed piston stroke control:
·Control range: Ram stroke speed
·Setting range:0.5~50mm/min
2. Constant speed load control:
·Control range:2~100%of full scale load
3. Displacement-keeping control
4. Load-keeping control
5. Constant speed strain control range:
·Range: 5~100% of full scale strain
6. Emergency shut down button & over load protection (auto stop) function equipped and return to the specified position automatically.
7. Control mode of operation: Auto/Manual function changeable
8. Automatic endpoints: The tester stops automatically while specimen breaks
9. Display of testing parameters: Value and real-time curve (Load and Stroke), available to display and switch from computer. Also the elongation can be calculated.

Featurers
1. Load:adopting load cell to ensure high accuracy, reliability and consistency;
2. Displacement:adopts optical encoder with high accuracy and stability;
3.Strain:Adopt high accuracy electronic extensometer
4.Compact structure: The machine has four column and two screw with strong stiffness;
5.Clamp automatically: uses hydraulic grips with reliable holding;
6.Multi-protection: protection of over-load by software and hardware; position-limited protection of piston and lower crosshead;
7.Test data: uses Access, Excel and other such kind software
8. It is servo control machine for load, displacement and deformation.
9. The load frame structure is 4-column and 2-lead screw with high stiffness.
10. Use load cell to test load, use encoder to measure the displacement, use digital extensometer to test deformation.
11. Software is based on Global Standards, such as CE, ISO, GB, ASTM, BS, JIS and EN etc
12.English,spain,thailand,russian etc language

Three Star Service :

*First Star---Pre-service

24 Hours online service for your consult

Help choose right model,and a series of service,person,advise.

*Second Star---Middle Service

--Give you best offer

--Provide discount for many sets order

--Do customer's request

--Choose payment term you convienent.

--Promptly production and delivery,inform you in time.

--Can provide invoice value as you like to decrease your tax.

. *Third Star---After serivce

--1 year warranty service and all life maintenance.

--Technical Egineer are avalible for oversea trainning.

--Free change for some parts

--Provide newest software vision when update

--Remote control technical consult

--Free installation DVD

--Maintenance plan